This is a link to a picture of my player, all info is in Chinese so I can't read it.

http://www.mydigit.cn/?dp-bbsthread-67590.html

mp3 player pics

I tried to update the firmware because the player was sold as having 4GB, but was only a 1 GB player. It couldn't keep track of song order and sometimes it would lose info, so I thought maybe flashing the firmware would work.

Now it just comes on and flashes. I've tried the revive MP3 player walkthrough and it does not help. I've run tweezers down the side of the chip and it seems to do nothing.

The board says KJT25030V10
2007.05.10

Any info or help would be appreciated. A link to the correct Firmware would also be appreciated.

Thanks,
Steve

The back of the case says MP4.MP3&FM Radio Player
YGY401022
I used a translating program and got a little more info.

chipset

Above-IC: AK1025 8C011A8 0D1 following IC: HY27UV08BG5A

Panel display: KJT25030V10

LCD side number: BKS-LC1723B 080816

Philips IC suspected: TEA5767 VDJ2K0 02 DuG6483Y

Get it into hard ADFU mode and give these firmware a try:

http://www.s1fw.com/plus/search.php?keyword=XTD&searchtype=titlekeyword
http://www.s1fw.com/plus/search.php?keyword=KJT&searchtype=titlekeyword

Thank you lolita.

Unfortunately I think the unit is now fried. I can't even get it to flash anymore.

While trying to get it into ADFU mode I think I fried the board by running tweezers down the side of the chip too many times.

It only cost me $20 bucks so I'll just trash it and next time buy namebrand instead of going for a good deal online.

4 gigs for $20 proves the old addage: if the deal is too good to be true it probably isn't.

HY27UV08BG5A is a real 4GB flash.

You need to keep the data pins of the flash shorted while powering it on via USB. It will become detected as ADFU device if you do that.

MP3 Player Utilities detected it as being only one gig. So now I'm confused.

I got the drive recognized as an ADFU device, but the first firmware I tried was incorrect so I tried the process again (and again, and again)

Anyways while trying the "short the flash while powering on the USB" trick I believe the board burned out. It does not power on anymore when I connect it and the computer does not recognize it.