Looking for firmware C_13116V_A2 9.1.53

please somebody help me i need a firmware for this mp3

LISONG mp3
Wilson and Co
LSC_13116V_A2
2008-02-21
9.1.53
2005-01-09

is the 1.5"

i've used another firmware and now is dead seems like the firmware was poison Rolling Eyes

Posted: Sat Dec 27, 2008 8:09 pm Post subject: Re: Firmware needed

Open it up, post board ID and CPU...

Posted: Sat Jan 03, 2009 7:51 pm Post subject: ID & CPU

Ok here are the codes:

QS13F11 VO. 2

and also has a date: 2007/08/28

behind the keyboard is written: QS03F06
behind the display are the chips and big one says:

hynix kor
hy27ut088g2a
tpc(teta grecian symbol)
this chip has pins in lefth and right

and other chip has.

ACU7513
This one has pins in all sides

by the way when i tried to put the firmware to my piece of sh...... AND
the program splahs a message like this

ERROR READ OR WRITE, PLEASE CHEK IF DEVICE IS CONECTING.....

the device is conected to the pc,this is fully recognized windows install the drivers "ACTIONS SEMICONDUCTORS CO, LTD."

i've found a dead player recovery guide and there says it must be recognized as "ADFU DEVICE" but mines

aaaa is the ipod reply sorry i'm not shure of the size of the screen seems like to be the 1.8"

sorry my english isn't good please apologize......

Posted: Sun Jan 04, 2009 6:10 am Post subject: Re: Firmware needed

ACU7513? That's a rare one.... try all the ACU7513 firmwares in s1fw.com

Posted: Thu Jan 15, 2009 9:00 am Post subject: Re: Firmware needed

ok my mp4 shows sings of life but still unusable.... only works as memory flash i need the dump file for 9.1.53 an how to upload to the mp4 can you help me??? Embarassed

Posted: Thu Jan 15, 2009 10:20 pm Post subject: Re: Firmware needed

Have you tried all the firmware?

If you get U disk functionality then ACTOS booted up and is running fine. You are probably only missing the display driver (and maybe keyboard driver).

Try putting files on it and playing them (on power-up first menu choice should be Music, so try menu -> wait few seconds -> play)

i've found one that fills but it's for 1.5" screen and Embarassed

mine is 1.8 i saw in that web you told me how to know the right firmware

is this very very rare

acu7513 xy-1.8C only xy1.8b is avaliable for download but doesn't work
blue screen again!!!!!!

the firmware that fill doesn't work fine i mean when i push play button the thing shuts down and re-boot and the same thin happen again again again......... also the menu pictures are inverted like mirror effect.....