Hourglass on fake ipod nano..

Posted: Sat Feb 14, 2009 9:21 pm Post subject:

i do not have the cd of the player when my sister gave it to me it is only the player and the earphone.And i am not using XP mine is windows 2000.

Posted: Sat Feb 14, 2009 10:41 pm Post subject: sage

PLEASE USE ONE THREAD PER ISSUE!

Newer version of s1clone supports 9.x version device. You must run it under administrative account.

Posted: Sat Feb 14, 2009 11:05 pm Post subject:

oh sorry.Just a newbie.

Posted: Sun Feb 15, 2009 8:10 pm Post subject:

I believe this is the correct firmware.
http://mympxplayer.org/full-firmware-ak1025-g-18a-main-v03-board-ver-9152-df800.html

I don't know what update tool to use??

& I don't know how to get my PC to recogonize the player??

Someone please help!! I've tried the recovery guide & a few other things with no luck.

Help!!!

Posted: Mon Feb 16, 2009 12:19 am Post subject:

Hi, Guys I just wanted to let you know I have mine back in action...not fully tested yet, but my Computer is picking them up & firmware is updated..which looks alot better then the original..

I had to find the Firmware from here:
http://mympxplayer.org/full-firmware-ak1025-g-18a-main-v03-board-ver-9152-df800.html

I used the MP3 Player Utilities 4.15 from here:
http://mympxplayer.org/mp3-player-utilities-dc44.html

Then I used this recovery guide to get my MP3 player recogonized on my Computer.

http://mympxplayer.org/dead-player-recovery-guide-vt567.html

Man I feel like a million bucks!!! I put a lot of effort into getting mine working....I hope they stay that way for awhile....

Special Thanks to everyone who helped me along the way..

Jason

Keep the firmware in case you need to recover in the future, and since it works for your player you can now change the interface with s1res and not worry about it being the wrong firmware.

Posted: Mon Feb 16, 2009 12:43 am Post subject:

I just wanted to add some additional info for you vhone601

Go to System/Hardware tab/device manager and check under Universal Serial Bus Controllers.

If you see USB 2.0 (HS) ADFU Device DON'T take your MP3 apart and do the recovery process.. You don't need to do the recovery, because the player is already in ADFU.

Simply use the firmware & MP3 utlities below & follow the instructions..You'll have your MP3 9.1.52
up in no time..

I had to find the Firmware from here:
http://mympxplayer.org/full-firmware-ak1025-g-18a-main-v03-board-ver-9152-df800.html

I used the MP3 Player Utilities 4.15 from here:
http://mympxplayer.org/mp3-player-utilities-dc44.html

I used this recovery guide to get ONE of my MP3 player recogonized on my Computer. Remember check the device manager first and see if there is anything in there with ADFU or S1MP3 etc..if it is you don't need to take your MP3 apart.

http://mympxplayer.org/dead-player-recovery-guide-vt567.html

Hope it helps you out..

Jason

Posted: Mon Feb 16, 2009 1:19 am Post subject:

lolita wrote (View Post): ›
Keep the firmware in case you need to recover in the future, and since it works for your player you can now change the interface with s1res and not worry about it being the wrong firmware.

Thanks lolita,

What types of interface to you reccomend for this player?

Posted: Mon Feb 16, 2009 7:50 pm Post subject:

You got yours working?That is amazing thought there is no way of that hourglass thing.
Thanks a lot jason.I will try to download those thing and see what will happen.At the same time still waiting for a reply on my other thread.

Posted: Tue Feb 17, 2009 1:56 am Post subject:

ftanl wrote (View Post): ›

lolita wrote (View Post): ›
Keep the firmware in case you need to recover in the future, and since it works for your player you can now change the interface with s1res and not worry about it being the wrong firmware.

Thanks lolita,

What types of interface to you reccomend for this player?

If the current one looks good and works for you, then no reason to change. But otherwise, look in customization board of this site for more information.

Posted: Tue Feb 17, 2009 6:18 pm Post subject:

ftanl wrote (View Post): ›
I just wanted to add some additional info for you vhone601

Go to System/Hardware tab/device manager and check under Universal Serial Bus Controllers.

If you see USB 2.0 (HS) ADFU Device DON'T take your MP3 apart and do the recovery process.. You don't need to do the recovery, because the player is already in ADFU.

Simply use the firmware & MP3 utlities below & follow the instructions..You'll have your MP3 9.1.52
up in no time..

I had to find the Firmware from here:
http://mympxplayer.org/full-firmware-ak1025-g-18a-main-v03-board-ver-9152-df800.html

I used the MP3 Player Utilities 4.15 from here:
http://mympxplayer.org/mp3-player-utilities-dc44.html

I used this recovery guide to get ONE of my MP3 player recogonized on my Computer. Remember check the device manager first and see if there is anything in there with ADFU or S1MP3 etc..if it is you don't need to take your MP3 apart.

http://mympxplayer.org/dead-player-recovery-guide-vt567.html

Hope it helps you out..

Jason

Hello Jason,
I tried downloading the firmware but i cannot execute the file it has the extension ".fw" What does it mean?What am i suppose to do with it?
Thanks!

Posted: Wed Feb 18, 2009 2:43 pm Post subject:

vhone601 wrote (View Post): ›

ftanl wrote (View Post): ›
I just wanted to add some additional info for you vhone601

Go to System/Hardware tab/device manager and check under Universal Serial Bus Controllers.

If you see USB 2.0 (HS) ADFU Device DON'T take your MP3 apart and do the recovery process.. You don't need to do the recovery, because the player is already in ADFU.

Simply use the firmware &amp; MP3 utlities below &amp; follow the instructions..You'll have your MP3 9.1.52
up in no time..

I had to find the Firmware from here:
http://mympxplayer.org/full-firmware-ak1025-g-18a-main-v03-board-ver-9152-df800.html

I used the MP3 Player Utilities 4.15 from here:
http://mympxplayer.org/mp3-player-utilities-dc44.html

I used this recovery guide to get ONE of my MP3 player recogonized on my Computer. Remember check the device manager first and see if there is anything in there with ADFU or S1MP3 etc..if it is you don't need to take your MP3 apart.

http://mympxplayer.org/dead-player-recovery-guide-vt567.html

Hope it helps you out..

Jason

Hello Jason,
I tried downloading the firmware but i cannot execute the file it has the extension ".fw" What does it mean?What am i suppose to do with it?
Thanks!

Hi, I'm guessing that the extention .fw means FirmWare.

Did you download & extract the 4.15 tool? if so open it and click on the MP3 Player Upgrade Tool

Then click on "select new firmware file" browse & find the one with the FW extention & it should read file & write to your player..

If the tool doesn't operate correctly...your device isn't in ADFU mode or the MP3 isn't recogonized..or you might need a different upgrade tool..

Try the steps that I used & let us know if it worked.

I have a different player here now that I've got to troubleshoot..The other ones are working better then ever..Good Luck!

Ftanl

Posted: Wed Feb 18, 2009 9:32 pm Post subject:

Hello
i tried the recovery guide but it still isnt showing as ADFU device.After using the tweezers, all i get is a white screen.It is still showing under the "Other device" Unknown device.Was it because my unit is not configured properly with the Removable Drive?Because i tried my Canon cam usb in my computer's port yet there is no F: drive(removable).All i got is the twain driver but F: drive not visible under windows explorer.
I can't update with the MP3 Utility since it is nor detected as adfu device.
Urghhhh.

Posted: Wed Feb 18, 2009 9:56 pm Post subject:

I'm thinking you have to load the ADFU driver for the unknown device.. not sure of the exact steps u need to take, but I think the ADFU file in in the WINDOWS.. try updating the driver..

I have the same problem your having on the other MP3 Player..will let you know how I fix that one as soon as I figure it out..

ttyl
Jason

Posted: Wed Feb 18, 2009 10:00 pm Post subject:

Yes i think i need to load ADFU driver.And really don't know how to do it.There is no USB 2(FS) ADFU Device under my USB device manager.Please let me know if you have some solutions..Thanks Jason!