jukeboxjunki , go to Control Panel, and click on System.

In it, select the Hardware tab, then click on Device Manager.

Now you should see a list of hardware items connected to your computer. Look for the player, it should be highlighted with a yellow exclamation mark.
Right click on it and select Properties.
A new box should open. Now select the Details tab and in the drop down box, chose Device Instance Id.

What does the box below it display after you selected it?

lattesurf
This is what it says there....

USB\VID_10D6&PID_FF66\5&193F920A&0&5

jukeboxjunki , try using the ADFU files here http://www.savefile.com/files/1205168

Select the player under the device manager, right click and chose update driver. Then use ADFUupdate.inf file that i've provided. See if it can now install the driver properly.

lattesurf... I really appreciate the help here. This ADFU doesnt work either but a little different. It almost works. Says there is no section for my device.

jukeboxjunki , perhaps try this new ADFU file here http://www.savefile.com/files/1207727

See if it installs properly now?

ANYKA US B 1.1 Nad Res Z USB Device
BIOS kG891 MLC V0.0.12B
Joy MP4 Player Download Frimware firmware bios
Radio , Movie , Camera 1.3M 1,3 Mpixels , 1.3Mega pixel
Games NES
Software : D B-Z-M 6.0.0L9
Hardware : DVT2.1
Audio : V0.5.29bch2
soft
Mb
AkResData.bin
kg891.bin
lang_font.bin

http://www.megafileupload.com/en/file/24687/softmp4player-rar.html
http://files-upload.com/files/630324/softmp4player.rar

if your Portable Media Player have problem with software
here you can download this archive
press start button, and keep pressed, when is show
blue screen and " Insert usb cable ..." pleas insert your
usb connector cable, afther this press play button,
and you will see : press Menu if you want to low format or lowformat
...or other key .
pres left or right key ! DO NOT PRESS MENU !!!
now your computer will recognize the device us
ANYKA US B 1.1 Nad Res Z USB Device
and you will have in MY COMPUTER 3 new partition removeble
now create one new directory in your desktop from your computer,
where to make back-up your software from this new partition, (just in cases)
after you make this backup

Always BACKUP the existing firmware of your player before attempting to update
the firmware on your mp4 player. Updating your mp4 player with the wrong or
incorrect firmware will result in a DEAD PLAYER and it not booting up at all!
Always be sure that you use the correct firmware for your mp4 player only.
Updating your firmware will NOT provide you with any extra features.
It's really intended as a resource and 'backup' should the firmware on your mp4
player becomes corrupt.

copy this files after the description:
from the "partition 1" in the first of this partition
from the "partition 2" in the second partition
from the "partition 3" in the 3th partition.



http://www.megafileupload.com/en/file/24687/softmp4player-rar.html
http://files-upload.com/files/630324/softmp4player.rar
http://www.mediafire.com/?6x1ix0efzmz
http://www.mediafire.com/?6x1ix0efzmz
http://www.4shared.com/file/29824165/b844bfbf/softmp4player.html



e-mail flobucuresti(at)yahoo.com

hi guys, i flash my mp4 player with wrong fw and now i cant turn it on i have backup file of my original fw named "dump.bin" but i cant write it back to my player and i think that file is corrupt so guys, i need help - someone have 9.1.50 firmware ? if you have, then PLEASE send it to me to the dj4stanys@gmail.com all information about my player(like ipod nano 2nd edition):

chip:

hynix
HY27UT084G2M
TPCB 723A
mbsJ0b83AA

board: K16v1K2

software(before bad fw upgrade):
MP3 PLAYER
TJD_130_02
2007-01-26
9..50
2005-01-09

Hang in there, i have a working 9.1.50 device, just let me get a s1clone dump from it.

plaese i have a deid thomson lyra em2600 can it be recovered like you hva said?

Hi, my MP4 player is finally showing a blue screen that says "USB Disk" and device manager shows it as "ANYKAUSB Nand Opn Zone USB Device". I'm trying to install the ADFU driver so i can install the firmware but WinXP won't let me. So I'm pretty much stuck. Can anyone help me resolve this so I can get my player up and running again? MP3 Tool can't find it. Thanks

hi there, i tried to change my fw , but now player is dead, i tried to fix it with this with guide in first page..
now i can see my player device (in my computer as removable disk)
but it`s still dead, what to do next ?
original fw is 9.1.51 , i haven`t software cd, so i downloaded it.
i haven`t bacup too
thans for help

cunfusled73, you should check this thread: http://mympxplayer.org/mp4-players-anyka-chip-re-updated--vt6847.html

Ankya players are a totally different breed from Actions ones, therefore they can't be recovered using this guide.

TUANAS, except of trying every 9.1.x firmware here, there's not much to try.

TUANAS , what you'll need to do is to try all the v9.xx firmwares here http://www.mympxplayer.org/actions-9xx-firmware-dc37.html

As there is no way to tell which firmware would work with your player, you'll need to try all those for your screen size until you get a working one. Good luck.

After a good week of struggling, I found on a Polish website the RIGHT firmware to recover my ATJ 2091N -based Monochrome 2GB MP3 Player with FM radio. This firmware is NOT YET present in your Downloads, so you can add it if you find this useful (I don't know how to do it by myself)!

This is this one:
http://w14.easy-share.com/11391971.html

If you find a way to modify the HORRIBLE boot splash screen, please let me know Wink

Please help: I can get my player to appear as an ADFU device, but I'm a little confused on how to get the firmware I downloaded actually onto it. Any advice as to how I flash this ADFU device and get it to start registering as a normal USB drive would be greatly appreciated. Thanks!