Thank you for your help.

There are three chips on the board.

1
Samsung 637
K9LAG08U0M

2
ED20L16161A-7
616A

3
BS9188 0463

That´s all i can find. I hope you can help me.

Jörg

I've uploaded on this site my player's firmware that came in the CD.

It's for a 'POWERPACK' Rockchip player that are being selled in South America (Brazil, Paraguay, etc), and maybe can help ppl from Chile & Peru that i've seen here.

Details below: (photos & more details in the included readme)

This ROCKCHIP FIRMWARE: ---------------------------------------

- Came on the CD of my ROCKCHIP MP4 Player
- Ver: 0.1.0006 & Date: 2007.4.9 as said by RKLogoEdit program.
- ALREADY flashed to the player!, working 100%.
- Has a menu with ONLY 8 options, without GAME! (see included picture of player)

THE PLAYER: ---------------------------------------------------

- Screen: 2" 220x176
- Firmware loaded: (same Menu screens as above with only 8 options, without GAME)
Ver: 00.01.0006
Date: 2007-02-01

- Model MF-MS68
- Mem: 2gb + mini SD slot

(I've uploaded full res photos in the Album section, search for PowerPack ms68. Approval pending)

Thank you for the Firmwarefile.

I have a problem to load them on my player. I install dein Software Refresh Firmware 2.6.1.2 but i can update the player...

Update Info

Not found any ROCK USB device.

But i see the Player as D: on my PC. I don´t know what i can do. Can you help me please.

Thank you from the Blackforest Germany.

Guggele

Guggele,
If you can use your player as a memory stick then make sure some music is loaded on, switch on the player and press the play button, Can you still play music on your player?
If you can then you have a chance to get the display back. You need to navigate the menu "blind" to the update option on your player, once you have done this connect the USB and load the firmware and start ConsumerUpdate. Your player must be in update mode for ConsumerUpdate to find the Rock USb device.

I can hear the music but i don´t know to use the player blind...

can you help me with the navigate!?

than you for your help.

cu guggele

If you have a blank screen this is how I get to the upgrade option on my RockChip player:-
.
switch player on wait for it to boot up to get to the main menu.
press the down key 8 times to get to the settings icon.
press the menu or select button to go into the settings menu.
press the down key 4 times to get to the system option.
press the menu or select button to go into the system menu.
press the down key 1 time to get to the upgrade option.
finally press the menu or select button to go into the upgrade option.

Then Connect the USB and use ConsumerUpdate.

If it says "Not found any ROCK USB device", then your player is not in upgrade mode.

you may have to restart your player and try this several times if you press a key wrong!

hello
my mp4 is x-sound!, http://www.xsoundbrasil.com.br/mp420.html
firmware error, blank screen.
Help me...

Do you have a copy of the firmware and ConsumerUpdate on a cd for your player?

If so then do this to get your player into upgrade mode:-

1) Switch the player OFF using the main on/off switch.

2) Hold down the menu key and keep it held down.(may be a different key for you but there are only 5 to try anyway)

3) Connect the usb to the player.

4) Wait for about 10 seconds before releasing the menu key.

5) You are now in upgrade mode

6) Then just connect ConsumerUpdate and upload a working firmware and try it!

dear ShootNIk ShootNIk ShootNIk ShootNIk ShootNIk,

i have the same player with rochchip ur main board no. is matched with my players board no. js820b_v30_061219,
i will help u to find something but plz my issues r -
1. i have a dead player and another one is good working if u know any software tool to extract firmware then i will give u extracted firmware file
2. if u find any firmware for ur player pls send me on my email id -
S9810133173@YAHOO.COM,
Gmax_satish@hotmail.com,
3. i have datasheet for rockchip-rk2606a i u want plz mail me i will send u (i dont have ur email id)

My player is BLANK, I killed when I upgrade the firmware that came on the CD, My player is IQ SOUND, no model on it, firmware on cd is

SC-1645,1654,2602A_MLC_FM.rfw

and it KILL my player, why they put firmware that does not work?

I have tried different firmwares but no joy

Can someone knows what is the right firmware for this??
txs

That is very bad.
They should put the right firmware on the cd, then again maybe they put the wrong version of ConsumerUpdate on the CD and the Firmware is the right one.
There are about 5 different versions of ConsumerUpdate, the wrong version of ConsumerUpdate can kill your player too, it happened to me.

All you can do is look on the internet for a rockchip player that has the same screen size as yours and try them all.

Does IQ sound have a website? try there for a download first.

If they make the screen go blank you can do this to get back into upgrade mode:-

1) Switch the player OFF using the main on/off switch.

2) Hold down the "MENU" or the "PLAY" button and keep it held down.(try the other buttons if these dont work)

3) Connect the usb to the player.

4) Wait for about 10 seconds before releasing the button.

5) You are now in "ROCK USB" upgrade mode!

6) Then just start ConsumerUpdate and upload the firmware.

Dec have a lot of pictures of players on their site and the firmware
to go with them.

http://www.digilife.com.cn/new/product_list.asp?Nclassid=25

http://www.digilife.com.cn/new/download.asp

I hope you can get your player back.

2satish33173
I sent firmware on your mail, but there button misplaced. I resold one pin rk2606A to button volume, but now me not enough button "next/FF". Any questions to mail, please.
About datasheet, do you meen this?:
http://forums.rockbox.org/index.php?topic=10428.msg86148

HI
i m satish from india , i have FOUR (TWO is dead another TWO is working) same mp4 player rockchip 2606a, with same board nos.
plz help me to recover my dead player,
1- i dont have firmware( I try some f/w but they r not compatible with the players I face problem - button configuration changed)
2- i have 1 working player but i dont have firmware extractor tool for rockchip
3- if u find something like a firmware or the extractor tool plz send me,

DETAILS FOR FRIST MP4-

Board no. JS820B_V3.0_061219

Controller= rockchip RK2606A
FM controller= PHILLIPS- TEA 5767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT( SC2020PXG-22T/LG-00440)
Features= SD CARD SLOT/ /FM/GAME/

DETAILS FOR SECOND MP4 PLAYER=

Board no-T-CHIP , TR093V31 / DATE 2006.09.30

Controller= rockchip RK2606A
FM controller= SPT – SP3767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT
Features= SD CARD SLOT/ /FM/GAME/
- photo of my mp4 player –is same like ur web page – rockchip dead recovery guide = = http://www.mympxplayer.org/rockchip-dead-player-recovery-guide-vt6686.html
my email id is = S9810133173@YAHOO.COM
GAMX_SATISH@HOTMAIL.COM
sorry for my bad english

HI
i m satish from india , i have FOUR (TWO is dead another TWO is working) same mp4 player rockchip 2606a, with same board nos.
plz help me to recover my dead player,
1- i dont have firmware( I try some f/w but they r not compatible with the players I face problem - button configuration changed)
2- i have 1 working player but i dont have firmware extractor tool for rockchip
3- if u find something like a firmware or the extractor tool plz send me,

DETAILS FOR FRIST MP4-

Board no. JS820B_V3.0_061219

Controller= rockchip RK2606A
FM controller= PHILLIPS- TEA 5767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT( SC2020PXG-22T/LG-00440)
Features= SD CARD SLOT/ /FM/GAME/

DETAILS FOR SECOND MP4 PLAYER=

Board no-T-CHIP , TR093V31 / DATE 2006.09.30

Controller= rockchip RK2606A
FM controller= SPT – SP3767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT
Features= SD CARD SLOT/ /FM/GAME/
- photo of my mp4 player –is same like ur web page – rockchip dead recovery guide = = http://www.mympxplayer.org/rockchip-dead-player-recovery-guide-vt6686.html
my email id is = S9810133173@YAHOO.COM
GAMX_SATISH@HOTMAIL.COM
sorry for my bad english

HI
i m satish from india , i have FOUR (TWO is dead another TWO is working) same mp4 player rockchip 2606a, with same board nos.
plz help me to recover my dead player,
1- i dont have firmware( I try some f/w but they r not compatible with the players I face problem - button configuration changed)
2- i have 1 working player but i dont have firmware extractor tool for rockchip
3- if u find something like a firmware or the extractor tool plz send me,

DETAILS FOR FRIST MP4-

Board no. JS820B_V3.0_061219

Controller= rockchip RK2606A
FM controller= PHILLIPS- TEA 5767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT( SC2020PXG-22T/LG-00440)
Features= SD CARD SLOT/ /FM/GAME/

DETAILS FOR SECOND MP4 PLAYER=

Board no-T-CHIP , TR093V31 / DATE 2006.09.30

Controller= rockchip RK2606A
FM controller= SPT – SP3767
Memory= SAMSUNG / K9G8G08U0M = 1 GB
TFT=2.0 INCH TFT
Features= SD CARD SLOT/ /FM/GAME/
- photo of my mp4 player –is same like ur web page – rockchip dead recovery guide = = http://www.mympxplayer.org/rockchip-dead-player-recovery-guide-vt6686.html
my email id is = S9810133173@YAHOO.COM
GAMX_SATISH@HOTMAIL.COM
sorry for my bad english