Hi,

you have to switch the resolution of cour computer screen to 1280x1024 (or higher) to see all the buttons of the Nand tool programm.

LOOOOOOOL... Thanks Knob
I was ready for call you to your home

knob wrote (View Post): › On the Mp4nation Forum another vx858 owner successfully recovered his player with a hard reset here's what he did:- "The hardest part of the recovery is to open the back of the player! Tools you need to put your player in “Programmable Mode”: 1. Small Tweezers After you open your player: 1. Carefully remove the battery to the side 2. With player turned off connect your player to computer. 3. Turn the player face down with the memory reader towards you! 4. With tweezers open, move tweezers touching the contacts of the Rock Chip from left to right on the side closest to you! 5. Stop as soon as you hear or see player connect to the computer 6. Reprogram you player using “Consumer Update” program. You will need to reformat your internal memory before you can start using it!"

Nand_tool does look interesting as it can force update...but how come it can't fit on the on a sreen? By the way i don't think it is installed yet because i started it from the folder i downloaded to...not from the start menu as other program. Does it make sens or do i have the right nand_tool program?

The Nand tool doesn't need to be installed you just click on Nand_Tool.exe
But don't bother with Nand tool yet, you need to be in RockUSB mode first.
Double click on the remove hardware icon in your system tray.



If you are in RockUSB mode you will see the icon in the window like this:-



You MUST be in RockUSB mode to change your firmware OR to use the NAND tool.
To get into RockUSb mode
1) switch the player off.
2) hold down the menu key.
3)connect the USB cable
4) wait a few seconds
5) release the menu key
6) look for the RockUSB icon.

7) If you see the RockUSB icon, load the CORRECT firmware for your vx858 player using Consumerupdate program.

It this fails then as a last resort I suggest you do the Hard Reset already described to get into RockUSB mode and load the CORRECT firmware for your vx858 player using Consumerupdate program.

You will need to open your player to do the HARD reset, but only try this if you are confident with opening your player or you might break something!

Hello guys! I'm new to the forum and i just bought a Onda Vx858. And unfortunately i tried to do a reskin to it and i killed it, because idiot that i am i uploaded the LE firmware to it instead of the standard VX858, and now when i turn it on i get the welcome screen and then at the main menu it gets blocked and i cant do anything to it anymore except reset it, to turn it back off, and i tried to do what you said with the auto update tool by turning off the player and then pressing on the buttons for 10 secs with the USB connected, and i got nothing(i installed the CUSTOMER UPDATE software, with 3 vers now 2.8.1, 3.1.0.0 and 3.1.2.0).Is there anything else i can do, or did I proceed correctly?
Must I have the original firmware from the MP4 player because i have the vers 0.0.8 and 0.0.16 and 0.0.17?
please help.thank you

sleepy wrote: › Hello guys! I'm new to the forum and i just bought a Onda Vx858. And unfortunately i tried to do a reskin to it and i killed it, because idiot that i am i uploaded the LE firmware to it instead of the standard VX858, and now when i turn it on i get the welcome screen and then at the main menu it gets blocked and i cant do anything to it anymore except reset it, to turn it back off, and i tried to do what you said with the auto update tool by turning off the player and then pressing on the buttons for 10 secs with the USB connected, and i got nothing(i installed the CUSTOMER UPDATE software, with 3 vers now 2.8.1, 3.1.0.0 and 3.1.2.0).Is there anything else i can do, or did I proceed correctly? Must I have the original firmware from the MP4 player because i have the vers 0.0.8 and 0.0.16 and 0.0.17? please help.thank you

I tried above method for reset of my mp4 player but i could not.my mp4 player is ONDA VX858LE
and i want to know how reset the hard type?
do you help me hard type reset method?do you have any picture from rockchipe for pins?

hi saloor1

On the Mp4nation Forum another vx858 owner successfully recovered his player with a hard reset here's what he did:-

"The hardest part of the recovery is to open the back of the player!
Tools you need to put your player in “Programmable Mode”:
1. Small Tweezers
After you open your player:
1. Carefully remove the battery to the side
2. With player turned off connect your player to computer.
3. Turn the player face down with the memory reader towards you!
4. With tweezers open, move tweezers touching the contacts of the Rock Chip from left to right on the side closest to you!
5. Stop as soon as you hear or see player connect to the computer
6. Reprogram you player using “Consumer Update” program.
You will need to reformat your internal memory before you can start using it!"

Please make sure you only try to flash the CORRECT firmware.
VX858 and VX858LE are 2 different players and their firmwares are NOT the same!
The VX858 uses a separate audio chip, VX858LE doesn't.

Hope this works for you...

Dear sir
thank you for your reply if it possible for you to send
the picture or hand drawing of rock chip(Onda VX 858LE) that showes the pins that i should touch them.

Thank you

Hi knob
i have oyher question, after remove the battry when i connect to USB?

Hi my knob
how are you?
when i connected my Onda to computer,i hear notification sound for connect but “Consumer Update” program can't detect the device and can't upgrade it.
after your recommendation for hard reset, i did it but Not happened.
Now same as before and i connected my device to computer and “Consumer Update” program can't detected it .
now i want to send my ONDA behind picture but i can not attached in this site please you send me your email address till i send you the picture.if possible advice me, what i do it?

best regards

Hello,

I'm new here. I have the Onda VX858 mp3 player and i'm having a hard time converting my video file. I don't understand chinese. Is there software in english? or a manual in english. I've tried to convert files with other programs and it does not work in gives me an error sign. It's very frustrating. Getting tired of the Jessica Simpson video.

Thanks,

Joe

PEOPLE THANK YOU VERRY MUCH!!!
YOU ARE THE BEST and the http://www.mympxplayer.org/ is the best:)
Finally i fix the problem with my MP4 player:)
it is Lasonic vp-04-NT the same like onda vx858 ,i had the same problem with the touch screen but now it works GREAT:) thanking to You:)
I just follow your instructions and it wokred:)
if somebody need the firmware just send a mail on sasho_sulev@abv.bg and i'll send the firmware:) because i don't know how to upload it on this site.

So anybody also has not decided as to enter a clone ONDA VX585 into a mode of loading after loading of an erroneous software?

Please, if someone knows the problem decision give also to me its decision.